Durable OEM Nested Wave Spring Carbon / Stainless Steel / 17- 7PH SUS631

All Products

Spiral Retaining Ring (70)

Wave Springs (137)

Single Turn Wave Spring (60)

Nested Wave Spring (34)

Round Wire Wave Springs (7)

Linear Wave Spring (11)

Constant Section Retaining Ring (37)

Laminar Sealing Rings (39)

Wire Snap Ring (10)

Metal Springy Spring (0)

Toroflux Flow Rings (0)

Jitter Ring (0)

Certification

Lisheng spring has passed by strictly inspection from Jeren;Lisheng Spring was approved as a green partner for China Jeren

—— Jeren

Lisheng spring has passed by strictly inspection from Lop;Lisheng Spring was approved as a Long-term cooperative suppliers

—— ROP

Lisheng spring has passed by strictly inspection from NTN;Lisheng Spring was approved as the largest partner in China

—— NTN

I'm Online Chat Now

Product Details:

Payment & Shipping Terms:

Contact Now

Detailed Product Description

Name:	Nested Wave Springs	Length:	Non-standard As Request&design
Non-standards:	OEM Is Available If You Provide A Drawing Or Sample	FOB Port:	Shanghai Or Ningbo
Sample:	Free(If There Is Ready-made Goods)	Product Standards:	GB,DIN,BS,ISO,JIS,ANSI,UNC
High Light:	nested wave spring , wavy washer spring

Nested Wave Springs manufacturer Carbon/stainless steel/17-7PH(SUS631)

Description:

1.Nested Wave Springs are pre-stacked in parallel from one continuous filament of flat wire.

2.The need to stack individual springs for higher loads is no longer necessary.

3.Nested springs result in a spring rate that increases proportionally to the number of turns.

4.They can exert tremendous forces, yet maintain the precision of a circular-grain wave spring.

5.In many applications, Nested Wave Springs replace Belleville Springs, particularly in cases where

a high but accurate force is needed.

Specification:

Product name	Nested Wave Springs
Outside Diameter	5mm-1000mm
Number of Turns	Customer's Demand
Number of Waves	Customer's Demand
Free Height Ref.	Customer's Demand
Load	Customer's Demand
Turn around	Right rotation
Material	Stainless Steel/304H / 316 / 316L / 631 /17-7PH / Monel Alloy / Inconel X-750
Processing craft	1.Material purchased-producing-First 2.Testing-Coiling-Inspection-Heat 3.Treatment-Cleaning-surface 4.Treatment-final 5.Testing-Packing-shipping
Processing Steps	Design →Drawing→ Flat the wire → CNC Machining → Heat treatment → Surface → Finishing → Quality Inspection → Packing
Application	motor, compressor main engine, fluid valve, water valve, air valve, automobile clutch, brake, electrical connector, bearing preloading device and compensation device, shaft seal, mechanical seal, etc.
Packing	1.inner packing: plastic bag 2.outer packing: carton box 3.other packing: wooden or plastic pallets,and at your request
Applications	For aerospace, automotive, medical, off-highway, oil & gas , Wind power ,Consumer Industrial